Vertical Cylinder Drying Machine Custom Column For Dyeing And Finishing
1. The vertical cylinder drying machine
- This is the most widely used in the dyeing and finishing of a drying drum drying machine.A single column, double columns and three columns and hollow columns several types, such as could be selected according to the actual process requirements.Are installed on each pair of column number is 8, 10 or 12 drying cylinder.Suitable for polyester/cotton blended fabrics such as this kind of equipment for drying, the final three drying cylinder should be changed to cooling roller, otherwise, the last to add 2 ~ 3 cooling roller, to reduce the temperature of the fabric, prevent the fabric from permanent crease.
2. The horizontal cylinder drying machine
- When drying fabrics produced by the hot and humid, is easy to eliminate air does not affect other drying cylinder drying ability.Installation and maintenance, wear cloth and the operation is more convenient.But as a result of equipment covers an area of large, so use fewer.
3. Bridge type drying drum drying machine
- It is vertical and horizontal two kinds of drying units into a hybrid drying machine, its biggest characteristic is to compact structure.But it ruled out hot and humid air is relatively difficult, so that the drying ability is lower than the other two, and complex structure, isn't very convenient for installation and maintenance and operation.As a result, they are rarely used in dyeing and finishing.
The drying cylinder drying machine of the composition and function of each part.
- Vertical cylinder drying machine is mainly composed of columns, drying cylinder, bearing and seal, hydrophobic, admission and drain pipe, expansion device and transmission, etc.
- Drying drum dryer using steam heating, steam from steam main hollow columns going into the drying machine (or groove rectangular column next to the steam pipe), respectively, introduced the only within the cylinder.Each admission side column (or into the steam pipe) are equipped with a regulating valve, safety valve and pressure gauge on each one, when the steam pressure in excess of the prescribed pressure on unit area, the safety valve will automatically open, put the surplus pressure steam.Into the steam inside the cylinder, transfer heat to the cylinder, and then passed around in the drying cylinder by cylinder surface water on the surface of the fabric, the steam condensed water by dissipating the heat, the condensed water discharge by the drainage pipe or siphon cylinder, into the drainage of the column (or line), the drain to the outside.Due to the effect of hydrophobic, prevent the water and steam discharge at the same time.
- Drying cylinder drying machine is the main part of the drying cylinder, cone bearing and hydrophobic dryer three parts.
Schematic diagram of the part name:
1-cloth feeding device
2-big padder
3, 5,7-line speed regulator
4-drying machine
6-Drafty device
8-cloth discharge device outlet assembly
