45CBM Hydraulic Cylinder Tri-axle Tipper Semi Trailer Heavy Duty Transport
Product Description:
Our company is the production of a new Semi Trailer Dump Truck, the low center of gravity structure design, to prevent lifting rollover occurs. Lower center of gravity to 1.3 meters, 1.4 meters, when loading do not shake and do not susceptible to rollover, reduce the damage of tires and springs. The truck frame and the carriage has obtained national patent frame with 16 beam Manganese plate made greatly increases the bearing strength. Wide rear and narrow front design is more conducive to dump, is not easy to be blocked,goods uniform unloading, never lead to rollover.
The hydraulic cylinder of the Semi Trailer Dump Truck is made from the special manufacturers, its material strength is much higher than the ordinary cylinder, improve the use of the product cycle.
The rear panel of the vehicle is locked with a mechanical device, the lock hook and the back plate are automatically opened at the time of unloading, and the blockage is avoided when unloading, especially when the stone is unloaded, and the loss of the vehicle is reduced.
The Semi Trailer Dump Truck is pulled goods volume can reach 45 CBM (non-standard 65CBM),
the weight can reach 80t - 100t, greatly improving the work efficiency is 8x4 self unloading alternative products (Dump Truck up to pull 25 CBM).
Standard Configurations:
| Product Name | 45CBM Hydraulic Cylinder Tri-axle Tipper Semi Trailer Heavy Duty Transport | ||||
| DIMENSIONS | |||||
| Tare Weight | 10600 kgs | ||||
| Payload | 35000 kgs | ||||
| Overall Length | 9200 mm | ||||
| Overall Width | 2465 mm | ||||
| Dump body size | 9500x2300x1560 | ||||
| DUMPER BODY | |||||
| Volume | 45 m3 | ||||
| Side Wall | 4mm thickness | ||||
| Front Wall & floor | 6mm thickness | ||||
| SPECIFICATION | |||||
| Chassis | Heavy duty and extra durability designed I beam; high tensile steel Q345B for chassis and dumper body. Top Flange 14mm,width 140mm; Double Middle Flange 6mm and 8mm; Bottom Flange 16mm,width 140mm. | ||||
| Axle | 3 axles | ||||
| BPW axle, 12 Ton | |||||
| Hydraulic System | one sets of cylinder | ||||
| Suspension | Germany type mechanical suspension | ||||
| Leaf Spring | 13-piece leaf spring. | ||||
| King Pin | JOST brand 2” Bolt-in King Pin | ||||
| Landing Gear | JOST brand Two-speed, manual operating, heavy duty landing gear | ||||
| Wheel Rim | 9.0-22.5 wheel rim, 13 pieces | ||||
| Tyre | 12R22.5 tubeless tire with one spare tire, 13 pieces | ||||
| Spare Tire | One set of spare tire including a carrier | ||||
| Braking System | WABCO RE 6 relay valve; T30/30 Spring brake chamber; 40L air tanks | ||||
| Painting |
Complete Chassis sand blasting to clean rust, 1 coat of anticorrosive prime, 2 coats of final paint |
||||
| Accessories | One standard tool box | ||||
