Products structure
Characteristics
1.Beautiful appearance
Small dimension,mot too high,not too light,in line with modern building,vatious of tower positions.
2.Advanced structure
Advanced structure design,most excellent matching of steam and water,full heat exchange,the products have achieved advanced standard in the world.
3.Light and strong
Body of the tower used high strength FRP complex materials,has ability of anti-aging,anti-corruption,not distortion,not fading,can bear Richter 8 earthquake,12 level typhoon,load more than 200kg/㎡ snow.
4.Lowest noise
The products adopt cooling tower specified motor,fan and specific water drenching noise elimination technology,attained leading level in the country.
5.Lowest charge
Comparing with the same style products,our motor can save 30% of power,equipped all needed pipes,can run inside circulate,greatly reduce charge.
6.Good environmental protection capability
Adopt high efficienct water collector,less than 0.01 ‰ water drifting rate,which has excellent environmental protection capability.
7.Reliable and sturdy
Steel supporter has double protectiong and zinc and Anti-corruption paint,has good performance of anti-corruption and a longer using age.
Technical Specification Table
Note
1.Design condition:Pressure :P=1.004c×10⁵Pa (753mmHg), dry-bulb temperature φ=31.5℃,wet-bulb temperature =28 ℃.
2.Standard input water temperature t1=37℃,output water temperature t2=32℃,Jin-Wen tower in the water temperature t1=43℃,a tower water temperature t2=32℃.
3.Hydraulic pressure of tower inlet is measured from the tower foot at the bottom of cooling tower.
Outline Dimension
Remark:
1.DN1 is water input pipe diameter,DN2 for effluent pipe diameter,DN3 is over flow pipe diameter,DN4 is water filler pipe diameter,DN5 is discharge waste pipe diameter.
2.All water input and output Flan Adopts PN1.Mpa (GB 119.2-88).
3.DF.DF(Ⅱ)400-600 adopts bottom hydraulic inlet working style,H1 indicates to inlet-pipe center height at the bottom.
