Chrome Steel Thrust Ball Bearing

Structure: Thrust
Type: Ball
Brand: KGS
Bore Size: 80 mm
Outside Diameter: 140 mm
Model Number: 52316
Seals Type: Open
Number of Row: Single Row
Certification: ISO9001:2000

automobile parts bearings 52316 descriptions
Double-row, double-direction thrust ball bearing has a 90-degree contact angle, steel cages, and an open construction. It is suitable for moderate-speed applications that support heavy axial loads in both directions and no radial loads. This deep-groove thrust ball bearing consists of two housing locating washers (rings), a shaft locating washer, and two ball and cage assemblies. The washers have grooved raceways that conform to the balls rotating between them, allowing higher speeds and thrust bearing capacity than bearings with flat raceways. The double-row design supports bidirectional thrust loads with minimum axial deflection, increasing the load carrying capacity, and the open construction allows for the bearing to be lubricated in place. This bearing has a 90-degree contact angle in which the ball and inner and outer raceway contact points are on a plane parallel to the axial load, which enables the bearing to receive high axial force. The balls and washers are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads, and the sheet steel cage prevents the balls from coming into contact with each other during use, reducing friction, vibration, and noise. This bearing is separable so it mounts more easily than nonseparable bearings because its components can be installed independently. It can be used at operating temperatures from -30 degrees C to 150 C (-22 degrees F to 302 F). This thrust ball bearing has a PN (normal) tolerance class rating for dimensional accuracy and is suitable for applications including machine tool drive shafts, automotive steering gears and clutches, rotary tables, outboard motor propellers, and household appliances.

Thrust ball bearings can withstand high thrust loads when running the design, the ball rolling with a washer-shaped ring rolling Erdaogou form. As for the saddle-shaped ring, therefore, thrust ball bearings are divided into flat seat type and adjusting thrust ball bearings hheey spherical saddle-type of two types. In addition, such bearings can withstand axial load, but can not bear radial load.

Said shaft and the shaft with the ring, and the shell with the said seat.
Thrust ball bearing type:
Acceptance of the situation points and two-way one-way thrust ball bearings thrust ball bearings. one-way thrust ball bearings can withstand axial load.
Thrust ball bearings, can withstand two-way axial load. Thrust ball bearings, ring and the shaft with them. Appear before the installation of seat spherical bearing, with self-aligning properties, could reduce the installation error.

Introduction
Thrust ball bearing is composed of race, blowout patch and cage.

Application fields
Crane hook, vertical pumps, vertical centrifuge, jack, low speed reducer