Quick Details
Application: as special tools for holding electric cable and optical fiber cable.
Surface treatment: special engineering plastic surface.
Tichnique: pultrusion
Dimensions: 4.5mm,6mm,8mm,10mm,11mm,12mm,13mm,14mm,15mm,16mm,18mm or customized
Length: 30m,50m,100m,200m,300m,500m or customized
Temperature range: -40℃ to +80℃
Color:yellow,white,orange or customized.
Specifications:
Fiberglass rodder
1.OD:3-16mm ferrule and pulling eye
2.50-500m per reel
3.Brake installed
4.meter marks reading length
Fiberglass push pull,Fiber snake duct rodder,cable rods
Advantages
- Fiberglass core is coated with high visibility sheath to protect against rod abrasion and reduce friction
- Round, flexible rod slides easily over wires in occupied conduit
- Exceptional bending strength for maneuvering tight turns
- Fiberglass is non-conductive and will not kink
- Accessories attach to fiberglass rod for greater versatility and easier fishing
Features and benefits of the rod:
light weight, durable, resistance to acid,alkali, aging resistant, corrosion resistant.
high tensile strength and bending properties to make it go through narrow pipes easily.
good temperatures adaptability, it will not soften in hot weather nor become brittle in cold weather, its usability will not be affected by temperature
its outer protected layer is made of high density polyethylene engineering plastic, which has good anti-UV capability, the advantage of smooth, wear-resistant and long service life.
there are meter marks on the rod for the user easily read it. The marks is waterproof, ultraviolet and it can be still clear even after using many times.
there are several colours available at option.
Features and benefits of the reel:
the reel is equipped with brake device, the rotating or stopping of the rod can be easily realized just by turning hand,
it has the tilting type handle, convenient for pushing and pulling.
it has roller and ring on the top and bottom used for the convenience of duct rodder going through,protect the cover from being scratched.
Fiberglass reinforced composited core | |
keinforcement | E-glassfiber |
Fiberglass content of inner part | 75-80% |
Material of the pulling rod | Fiberglass(inner) high density polyethylene(outer) |
density | > 1.9g/cm3 |
Working temperature | -40°C to + 80°C |
Minimum pulling strength | 4000 N±5% |
Tensile modulus | >46.50Mpa |
Consistency of rod | 137g/m |
Flexural modulus | >46.50Mpa |
Elongation at break | 2.5-3% |
Min.bending radius | 380mm |
Polyethylene cover | |
Tensile strength | >15N/mm2 |
Environmental stress & crack resistance | >1000 hr. |
Heat stability | ok |
Carbon black | ok |
Specifications | |
rod diameter(mm) | 4.5,6,8,10,11,12,13,14,15,16,18 |
rod length (meter) | 30-500 |
reel size (mm) | 1300x450x1330, 1200x420x1220, 980x350x1000,680x240x700,420x180x400 |
.gif)
