Professional UV Coating Waterproof Insulation Board / External Wall Decorative Insulation Boards

Product

Performance

Metal Fluorocarbon Painting Decorative Insulation

Board

Decoration

Layer

UV coating decorative board

Water-resistant, fire-resistant, anti-pollution, anti-scratch, anti-abrasion, anti-acid , alkali resistance, impact resistance,UV-Resistance and weather resistance

Precious stone pattern, color, and gloss optional designed; Same using life for indoor use and building, the outdoor life is more than 25 years.

Insulation Layer

EPS insulation layer

(Grade B1)

Heat conductivity ≤0.041.  volume-weight :18kg / m³ with the tensile strength:110--120kpa; volume-weight 20kg / m³ with the tensile strength :140kpa.

XPS insulation Layer

(Grade B1)

Heat conductivity ≤0.030. Volume-weight 25--45kg / m³ & tensile ≥150kpa. Strong compressive resistance.   30-40 years average using life. Excenllent structure load-bearing performance .

Polyurethane insulation board

(Grade B1)

Hard polyurethane with low thermal conductivity, good thermal performance. When the hard polyurethane with the  density of  35 ~ 40kg / m3, thermal conductivity is only 0.018 ~ 0.024w / (m.k), equivalent to  half of the EPS, is the lowest heat conductivity of all the insulation materials .

TPS insulation board

(Grade B1)

Heat insulation thermal conductivity is 0.060W / (m · k) ,it has good tensile compressive strength , impact resistance and stability ; its compressive strength reaches 150-500KPa

Rock wool  (Grade A)

Appearance quality: smooth surface, without prejudice practical scars, stains damaged. Combustion performance: non-combustible. Thermal load contraction temperature: 643 degrees.
Moisture absorption: 3.9%. Organic content: 2.9%.
Rockwool board basic parameters:
Material: rockwool
Apparent density: Rockwool 120 (kg / m3)
Heat conductivity: 0.04 (W / (m.K))
Max operating temperature: 80 ()
Specifications: 950,1150 (mm )
Operation standard: GB
Operating temperature: 80 ()

Phenolic Foam Board(Grade B Grade A)

Not be melt at high temperatures ,not be softened, with low smoke, non-proliferation flame resistance, flame penetration, There is  no distortion, no burning ,no fire, being placed 10 minutes at 1400 , can effectively prevent the flames and smoke spread

Weather resistance

JF149-2003,

JGG144-2004

After weather resistance test,No damage such as facing layer blistering or falling off,Protective layer hollowing or falling off; No seepage crack appear.

No damage such as facing layer blistering or falling off,Protective layer hollowing or falling off; No seepage crack

JG149-2003,

JGJ144-2004

Impact-resistance strength grade:10

Water absorption  g/,Immersed 24H

JG149-2003,

JGJ144-2004

≤500

21

Wind pressure resistance value   KPa

JG149-2003,JGJ144-2004

Not less than the wind load design value of the project

After 15 kpa level wind load resistance test,,no water seepage

Freezing and thawing resistance

JG149-2003,JGJ144-2004

No surface cracking,hollowing,blistering,

exfoliation

No surface cracking,hollowing,

blistering,exfoliation

Steam flow density g/(·H)

JG149-2003,JGJ144-2004

≥0.85

2.36

Watertightness

JG149-2003,JGJ144-2004

Sample protective layer inside without water infiltration

Sample protective layer

inside without water infiltration

Thermal conductivity W/(m·k)

GB/T10801.1-2002,JG149-2003

≤0.041

0.033

Apparent density kg/m³

GB/T10801.1-2002,JG149-2003

18.0-22.0

19

The compressive strength perpendicular to the panel  MPa

GB/T10801.1-2002,JG149-2003

≥0.10

0.10

Dimensional stability  %

GB/T10801.1-2002,JG149-2003

≤0.30

Length Change 0.13

Width Change 0.15

Thickness Change 0.24

Compression strength KPa

GB/T10801.1-2002,JG149-2003

≥60

99

Water vapor permeability ng/(Pa··s)

GB/T10801.1-2002,JG149-2003

≤60

4

Water absorption(Volume fraction)%

GB/T10801.1-2002,JG149-2003

≤6

2

Tensile bond strength  MPa

(Connected with cement mortar)

Original intensity

JG149-2003

≥0.60

0.94

Water resistant

JG149-2003

≥0.40

0.54

Tensile bond strength  MPa

(Connected with Expanded polyphenyl board)

Original intensity

JG149-2003

≥0.10,Destroy interface on EPS Board

≥0.10,Destroy interface

on EPS Board

Water resistant

JG149-2003

≥0.10,Destroy interface on EPS Board

≥0.10,Destroy interface

on EPS Board

Operational time  H

JG149-2003

1.5-4.0

4.0

Single anchor bolt tensile standard capacity  KN

JG149-2003

≥0.30

0.83

        Test Item

Detection standard and requirements

The third party test results

Dimensional Deviation

Length(mm)

GB/T7748-1999

±1.5

-1.0~0

Width(mm)

±1.5

-1.0~0.5

Thickness(mm)

±0.5

-0.2~0.1

Diagonal difference(mm)

≤2.0