10M / 100M PoE PSE Fiber Optic Media Converter LFP Over current protection
-10/100Base-TX UTP to 100Base-FX fiber media convertion
-IEEE802.3af PoE PSE compatible
-Built-in AC/DC power supply
-Over-current protection
-choice of SC, BiDi or LC connectors for multimode and singlemode
-DIP switch to set different configurations
-LFP (Link Fault Pass-through) support
POE-FR200 is a 10/100Base-TX to 100Base-FX media converter, which allows two
types of network segment to be connected easily. Complied with IEEE802.3af
standard, the AC/DC powered PoE media converter is a Power Sourcing Equipment
(PSE) which combines data transfered over a fiber optic link with 48V (or other
voltage) power supply, providing power to IEEE802.3af powered device (PD) over
CAT5 UTP cable (cable length up to 100meters / 330feets). The converter includes a
single port PSE controller, which offers PD signature sensing and power monitoring
features. Other features include over-current protection, LFP function. The LFP (Link
Fauit Pass-through) allows the media converter to monitor both the fiber and copper
RX port for loss of signal. In case of a loss of RX signal on one media port, the
converter will automatically disable the TX signal to the other media port, thus
passing through the link fault.
Technical Specifications:
Data Rates:
- 10/100 Mbps (802.3 10Base-T/802.3u 100Base-T)
- 100Mbps (100Base-FX)
Input Power Requirements:
- Input voltage ........................... 100 VAC to 240 VAC
- Input frequency ................................. 47 Hz to 63 Hz
Power over Ethernet Output:
- Pin Assignment and Polarity……...4/5 (V+),7/8 (V-)
- Output Power…..please refer to ordering information
- Efficiency ....................................................75% min
- Short circuit protection........................ auto recovery
- Over current protection ....................... auto recovery
Environmental Conditions:
- Operating temperature ....................... …0 to 50
- Cooling ........................................ free air convection
- Storage temperature ...................... -20 to +85
- Operating Humidity …... 90% max, non-condensing
Mechanical Specifications:
- Case Material………………………………Iron
- Case Color………………………………….Black
- Net Weight…………………….540g approx. / unit
- Dimensions………110(W) x 40(H) x 140(L) (mm)
Do not include transceiver length
Connectors:
- AC Inlet……………………………………IEC-J-4
- LAN……………………………….Shielded RJ-45
- Fiber………………………………see ordering information
Ordering Information:
| Part Number | Supported Standard |
Output Voltage |
Output Current |
Output Power | Remark |
| POE-FR200S-XX-XXX | IEEE 802.3af | 48V | 0.35A max | 15.4W max | default |
| POE-FR200-XX-XXX | IEEE 802.3af | 48V | 0.54A max | 25W max | default |
| POE-FR200-AXX-XXX | IEEE 802.3af | 56V | 0.54A max | 30W max | optional |
| POE-FR200-BXX-XXX | Non-standard | 48V | 0.60A max | 30W max | optional |
| POE-FR200-CXX-XXX | Non-standard | 24V | 1.20A max | 30W max | optional |
*XX-XXX: supports optic connector / fiber type and distance. For more details,
please refer to the list below.
| Suffix | Description | Suffix | Description |
| SC-M02 | SC, Multi-Mode, 2km / 1300nm |
LC-M02 | LC SFP, Multi-Mode, 2km / 1300nm |
| SC-S05 | SC, Single-Mode, 5km , 1310nm |
LC-S05 | LC SFP, Single-Mode, 5km , 1310nm |
| SC-S20 | SC, Single-Mode, 20km , 1310nm |
LC-S20 | LC SFP, Single-Mode, 20km , 1310nm |
| SC-S40 | SC, Single-Mode, 40km , 1310nm |
LC-S40 | LC SFP, Single-Mode, 40km , 1310nm |
| SC-S60 | SC, Single-Mode, 60km , 1310nm |
BS3-S20 | BiDi SC , Single-Mode, 20km , 1310/1550nm |
| SC-S80 | SC, Single-Mode, 80km , 1550nm |
BS3-S40 | BiDi SC , Single-Mode, 40km , 1310/1550nm |
| SC-SA0 | SC, Single-Mode, 100km , 1550nm |
BS5-S20 | BiDi SC , Single-Mode, 20km , 1550/1310nm |
| SC-SC0 | SC, Single-Mode, 120km , 1550nm |
BS5-S40 | BiDi SC , Single-Mode, 40km , 1550/1310nm |
