.jpg)
Driven by suction type dispenser motor
No electronic parts
Durable and high efficiency
Less maintenance cost
Able to handle 2 nozzles in simultaneous
Compatible to all vapor recovery system
Full service parts support
Designed for UL and ATEK standard
VRS-200 dispenser mounted vacuum pump able to operate
With all type of nozzle, hose, breakaway and adaptor
Specification:
Efficiency: 1/8 HP
RPM: 1800 RPM
Capacity: 80 LPM
Inlet/Outlet dia.: 1/2”
Temperature range: - 35 ℃ to 65 ℃
Installation instruction:
One pump is required to mount on a bracket and attached on the frame of the dispenser. Calculation is required to work out the dimension of pulley for FGDRVRS-200 pump. It is then driven by a belt extended from dispenser motor and fuel pumping unit. Diameter of vapor pump pulley related to speed and pulley size of dispenser motor. FGDRVRS-200 pump will give you optimum performance of vacuum 90” W.C. at 1800 rpm. Therefore to work out diameter of FGDRVRS-200 pulley will be 1900 rpm divided by rpm to motor and multiply the diameter of motor pulley.
Features:
High durability as it has cast iron casting and able to work under extreme tough conditions in various temperature and climate; mishandling, last long running without lubricant. Simple and easy installation driven by pulley and belt and powered by motor from dispenser. One pump one dispenser to give you maximum capacity and efficiency. Easy for maintenance and big saving for long term. No electrical and electronic parts. Simple mechanism using only vane and rotor to pull vacuum and minimize cost of spare parts.
.jpg)
