Multi-function Integrated Optic Chip for Gyroscope (Y waveguide modulators)
Model: MIOC-13-09-XX-N
Description
Idealphotonics' LiNbO3 multi-function integrated optical chip (MIOC) is manufactured by micro-electronics technology. There are several cells integrated on the same chip, include polarizer, splitter /combiner, phase modulator, etc.
Feathure
X-Cut, y-propagating LiNbO3
Very low insertion loss.
APE process for waveguide, works in single polarization
High extinction ratio
Fiber is sloping coupled with waveguide, which deduce optical return f
ar and away
Push-pull electrode design may deduce half wave Voltage
Small packaging and lightweight
Excellent long-term stability
Application
Fiber optic gyroscopes (FOG).
Fiber optic current senser(FOCS)
Hydrophone and other optic sensitive fields
It is for attitude control of movements such as aircrafts, ships, guided missiles, automobiles etc in the fiber gyroscope system, Hydrophone and other optic sensitive fields. Faraday Effect was used to measure current through fiber circuit in the current sensing system.
Chip structure:
Specification
Parameter | Unit | Values |
Wavelength | nm | 1310 |
Insertion | dB | ≤4.0 |
Half wave Voltage | V | ≤4.0 |
Splitting Beam Ratio | - | 47/53－53/47 |
Optical Return | dB | ≥50 |
Polarization extinction ,chip | dB | ≥55 |
Additional Intensity Modulating | - | ≤0.2% |
PM Pigtail Crosstalk | dB | ≤-30 |
Electrode type | - | Push-pull modulating |
Bandwidth | MHz | ≥300 |
Pigtail type | - | PM |
Work temperature | ℃ | -40～+70 |
Packaging dimensions | mm | 30X8X5 or 35X10X5 |
Different packages
New package of Naked ceramic package
Package Size
Ordering information
Type | Description |
MIOC-13-09-09-N | 1310nm integrated optical chips ( Y waveguide) input/output: 125/250um PM fiber, 1m fiber length, without connector |
MIOC-13-09-80-N | 1310nm integrated optical chips ( Y waveguide) input: 125/250um PM fiber, output with 80/165um PM fiber, 1m fiber length, without connector |
We can provide different pigtail and package by customer requirement.
For more information on this or other products and their availability, please contact us:info@idealphotonics.com
Operation Instructions
a). If the devices work under the single state of polarization, the polarization state of input light must conform to devices.
b).Avoid the Electrical damage of the devices; the electrode voltage of modulators should be lower 30V.
c) .Applying too much force to fiber may cause it broking easily. Avoid drawing,twisting.Bending radius must not be less than 30nm.
d) Avoid too much force between metal tube and fibers. Put up the tube and the fibers together when using it. Avoid bending at the joint of the tube and the fibers.
e) Storage environment humidity must be less than 50%, and not contain the materials which damages devices.
f) Avoid the devices suffering from intense thermal shock and inhomogeneous by heated
g) Avoid stressing to the joint of the fiber connection circuits.
