CE Certificate Automatic Plug Insertion Machine Cable Crimping Machines for AC Plug 220V/50Hz
Patent No: ZL200520066404.7 & ZL200720057480.0
Features:
can do wire stripping, separation, automatic feed terminal, crimping terminal at one time because we put all the moulds together in one machine.
Applicable Wire/Cable: H03VVH2-F, H05VVH2-F
Applicable Terminal: Korea Terminal, Europe Terminal, Brazil Terminal, Russian Terminal
Specifications:
Model name: inserter machine
|
Model No. |
SD-VDE1800 |
| Production Capacity | 2000-2300pcs/hour |
| Punching Force | 3T |
| Voltage | AC220V/50HZ |
| Pressure of air source | 0.5-0.8MPa |
| Dimension | 1150mm*700mm*1480mm |
| Weight | 375KG |
Strong Points:
- Specialized
- Safe
- Stable Quality
- Easy Operation
- High Efficiency
Operation:
1, Operating Preparation:
(1) Add oil fuel and lubricating oil to ach part which need.
(2) whether the upper and lower mold screw (the crimping parts of the upper and lower mold) is fully locked or not.
(3) whether pressure reaches 4.5KG.
(4) Terminal Placement:the terminal put into the vibrating plate, can be put around 1000 terminals one timeputting wire into the "24"left back position, wire into the "22", the wire transferring from left to right being sent in the right direction with the terminal riveting synchronously.
(5) Whether the punching press, vibration plate switch is turned on or not
2. Other matters :
(1) wire strippers are not in place or when sending terminal, the machine with will automatically and give off audible hum, (after 3 seconds the noise stops),at this time press the start switch "1"to cntinue operations.
(2) The daily operation is completed, clearing up the machine with the air gun, particularly to clear up the debris near the plane line and cutting line work bit .
(3) The oil added: before starting machine each day , adding oil to all parts.
(4) Paying attention to drainage for the filter
(5) Timely clear up the wastes in the waste tank.
