Solid SFTP Cat6a Ethernet Lan Cable 23Awg High Speed For Networking
Quick Detail:
1. Lan 500Mhz S/FTP cat6A Cable 4x2X23AWG
2.Structure: Bare copper conductor +HDPE insulation+ AL-Foil +Drain wire(customized)+ Braided shield + Jacket
3. Conductor: 1/0.575mm Bare copper , soft annealed bare copper.
4.Insulation: America Dow's HDPE
5.Outer jacket: PVC,LSZH,CMR ,CMP are available and any color will be optional.
6.Test :Pass fluke test and with 25 years quality warranty.
Application
Data cable for transmission of digital and analog signals up to 500 MHz. The cable is designed for horizontal cablings sub-systems as connection between a floor distribution and the telecommunication outlets (TO's). According to TIA/EIA-568, ISO/IEC 11801 2nd edition, EN 50173, EN 50288-4-1, IEC 61156-5. For application in LANs like IEEE 802.3: 10Base-T, 100Base-T, 1000Base-T, 10GBase-T; FDDI; ISDN; ATM; Cable sharing.
Specification
Conductor bare copper AWG 23/1, massive
Insulation HDPE, ca. 1.37 mm outer Ø
Core identification code acc. to IEC 708-1
Pair screening plastic laminated aluminium foil
Pair 4 pairs
Screening braid of copper wire, tinned wire 0,10 mm
Outer sheath PVC, LSZH PVC ,CMR, outer Ø: ca. 7.4 mm
Electrical properties at 20° C
Resistance (loop) max. 150 Ω/km, acc. to VDE 0812
Insulation resistance min. 5 GΩxkm
Mutual capacitance nom. 45 nF/km
Characteristic impedance 100 Ω ±5 Ω
(at 100 MHz)
Velocity of propagation ca. 0.79 c
Signal propagation time <425 ns/100m
Delay difference <5 ns/100m
Screening attenuation >75 dB
(up to 600 MHz)
Test voltage 700 V (AC)
Cat6a S/FTP Twisted Pair Cable, Bulk cable Transmission properties
f [MHz] | Attenuation nom. [dB/100m] | NEXT nom. [dB] | ACR nom. [dB/100m] | ELFEXT nom. [dB/100m] | RL nom. [dB] |
1 | 1.8 | 105 | 103 | 95 | 25 |
4 | 3.3 | 105 | 103 | 93 | 28 |
10 | 5.3 | 105 | 100 | 92 | 30 |
16 | 6.7 | 105 | 98 | 91 | 32 |
20 | 7.5 | 105 | 97 | 90 | 34 |
31,25 | 9.6 | 105 | 95 | 86 | 35 |
62,5 | 13.8 | 103 | 89 | 82 | 34 |
100 | 17.3 | 100 | 83 | 77 | 33 |
155 | 22.6 | 98 | 75 | 73 | 30 |
200 | 24.8 | 95 | 70 | 70 | 29 |
300 | 30.7 | 93 | 62 | 67 | 27 |
400 | 35.8 | 90 | 54 | 64 | 26 |
500 | 39.7 | 87 | 47 | 62 | 24 |
Mechanical and thermal properties
Minimum bending radius | during installation: 8 x cable Ø |
static: 4 x cable Ø | |
Permissible temperature range | during installation:0˚ C up to +50˚ C |
static: -20˚ C up to +75˚ C | |
Flame propagation | flame retardant acc. to IEC 60332-1-2 |
General requirements | Dangerous and forbidden substances acc. to RoHS directive (2002/95/EG) are |
not allowed to the manufacturing. |
