TYP | forged pipe fittings |
SIZE | 1/8"-4" |
Pressure | 2000# 3000# 6000# 9000# |
STANDARD | ASME B16.11,MSS SP-43,DIN 2615/2616/2617,JIS B2311/2220 GB14383 |
MATERIAL | A105 A234-WPB,A420-WPL6,A234-WP11,A234-WP5,A403-WP304,A403-WP304L, 312 A106 A53 A36 SS400 A403-WP316,A403-WP316L,SS304,SS304L,SS316,SS316L A234 WP12 P9 Pipe fittings can be specially manufactured to suit customers requirements in a variety of material |
APPLICATIONS INDUSTRIES | For use in the Pulp and Paper,Gas,Water Treatment, Sewage Treatment,Chemical,Biotech,Food,Mining, Architectural,Transportation |
QUALITY | First Grade |
SURFACE TREATMENT | shot blasted,rust-proof black oil, galvanized |
RADIUS of CURVATURE | ANSI,ASME,API5L,DIN,JIS,BS,GB |
PACKING | Wooden cases or Wooden pallets, as per customers' requirement |
CERTIFICATES | ISO9001,ISO14001, CE |
OTHERS | 1.special design available according to requirement 2.anti-corrosion and high-temperature resistant with black painting |
NPS | HUB DIA | DIA RAISED FACE | OUT SIDE DIA | MIN THK FLG | HEIGHT FLG | HUB DIA | DIA OF TAPPING | BOLT CIRCLE | NO OF BOLTS | DIA OF HOLES | DIA STUD BOLTS | STUD BOLT LENGTH |
A | R | O | T | H | X | Tg | ||||||
1 | 33.4 | 50.8 | 125 | 36.6 | 81 | 54 | 6.4 | 88.9 | 4 | 11/16 | 5/8 | 125 |
1½ | 48.3 | 73.0 | 155 | 36.6 | 84 | 70 | 6.4 | 114.3 | 4 | 13/16 | 3/4 | 135 |
2 | 60.3 | 92.1 | 165 | 36.6 | 84 | 84 | 6.4 | 127.0 | 8 | 11/16 | 5/8 | 125 |
2½ | 73.0 | 104.8 | 190 | 36.6 | 87 | 100 | 6.4 | 149.2 | 8 | 13/16 | 3/4 | 135 |
3 | 88.9 | 127.0 | 210 | 36.6 | 87 | 117 | 9.5 | 168.3 | 8 | 13/16 | 3/4 | 135 |
4 | 114.3 | 157.2 | 255 | 36.6 | 90 | 146 | 12.7 | 200.0 | 8 | 13/16 | 3/4 | 135 |
6 | 168.3 | 215.9 | 320 | 36.6 | 98 | 206 | 12.7 | 269.9 | 12 | 7/8 | 3/4 | 135 |
8 | 219.1 | 269.9 | 380 | 39.7 | 110 | 260 | 12.7 | 330.2 | 12 | 1 | 7/8 | 145 |
10 | 273.0 | 323.8 | 445 | 46.1 | 116 | 321 | 12.7 | 387.4 | 16 | 1 1/8 | 1 | 165 |
12 | 323.8 | 381.0 | 520 | 49.3 | 129 | 375 | 12.7 | 450.8 | 16 | 1 1/4 | 1 1/8 | 180 |
14 | 355.6 | 412.8 | 585 | 52.4 | 141 | 425 | 12.7 | 514.4 | 20 | 1 1/4 | 1 1/8 | 185 |
16 | 406.4 | 469.9 | 650 | 55.6 | 144 | 483 | 12.7 | 571.5 | 20 | 1 3/8 | 1 1/4 | 195 |
18 | 457.0 | 533.4 | 710 | 58.8 | 157 | 533 | 12.7 | 628.6 | 24 | 1 3/8 | 1 1/4 | 205 |
20 | 508.0 | 584.2 | 775 | 62.0 | 160 | 587 | 12.7 | 685.8 | 24 | 1 3/8 | 1 1/4 | 215 |
24 | 610.0 | 692.2 | 915 | 68.3 | 167 | 702 | 12.7 | 812.8 | 24 | 1 5/8 | 1 1/2 | 240 |
NPS | A | R | O | T | H | X | Tg | BOLT CIRCLE | NO OF BOLTS | DIA OF HOLES | DIA STUD BOLTS | STUD BOLT LENGTH |
HUB DIA | DIA RAISED FACE | OUT SIDE DIA | MIN THK FLG | HEIGHT FLG | HUB DIA | DIA OF TAPPING |
GENERAL NOTES:
- Dimensions are in millimeters, except for bolts and bolt holes.
- Height of Raised Face (Rf) in CLASS 300 is 2 mm.
- All other dimensions are in accordance with ASME B16.5.
- Ring joint flanges larger than NPS 3 will require angular meter taps.
NOTES:
- Other NPT sizes may be furnished if required.
- The length of the Stud Bolt does not include the height of the chamfers (points).
- Bolt lengths for raised face flanges include allowance for orifice and gasket thickness of 6 mm (0.25 in.) for NPS 1 to NPS 12. Bolt lengths for ring-type joint flanges include allowance of 15 mm (0.62 in.) for NPS 1 to NPS 3.
- Bore (B) is to be specified by the purchaser.
Tolerances
Tolerances on all dimensions shall be as shown in ASME B16.5 except for those shown below.
Tolerances on all dimensions shall be as shown in ASME B16.5 except for those shown below.
Pressure Tap Location
Tolerance on location of center of pressure tap hole from flange face shall be:
Tolerance on location of center of pressure tap hole from flange face shall be:
- ±0.5 mm (±0.02 in.) for flanges smaller than NPS 4
- ±0.8 mm (±0.03 in.) for flanges NPS 4 and larger
Bore Diameter
- Bore diameter tolerance (Welding Neck flanges only) is ±0.5% of nominal value.