1, Fully hydraulic drive is adopted, all hydraulic pumps, electro-hydraulic proportional valves and other hydraulic components are imported
2, Tilt angles are set up freely in the range of 0~90°
3 ,Tilt speed is stepless regulated in the range of 4°/S~8°/S and can be set up within tilt range, multi-rotating speed segments satisfy different casting processes
4 ,Man-machine interface (MHI), realtime display of status and input via menu are adopted. Multiple sets of technological parameters can be pre-set
5, The complete machine is applicable to operate at ambient temperatures 0~40°C and in environment with sand dust and splash of high-temperature metals
6 ,Two interfaces for pull-out block splash cylinder are preserved
7Installation and replacement of moulds are convenient
Main technical parameters | NZJ430Q | NZJ630Q |
Max size of template | 400*300mm | 600*350mm |
Minimum opening template file size | 300mm | 300mm |
The maximum size of the template to open file | 600mm | 650mm |
Max mold closing force | 25KN | 65KN |
Max mold opening force | 20KN | 40KN |
Max stroke of movable mould plate | 300mm | 350mm |
Ejector cylinder force | 15KN | 30KN |
Tilting angle of table | 0°~90° | 0°~90° |
Rated power of hydraulic system | 3.75KW | 3.7KW |
Pressure rating of hydraulic system | 6.3Mpa | 6.3Mpa |
Working pressure of hydraulic system | 5Mpa | 5Mpa |
Operating method | Manual, Auto | Manual, Auto |
Mould heating (combination hub) | Electric heating | Electric heating |
Temperature control | Two heating control systems prepared | |
1-line core-pulling interface reserved at the equipment: | Have | Have |