Description
NF8108M is network equipment after NF-8108. According to customers' requirement, it is updated with backlight function and 8 remote identifiers. Its main functions are: cable connection sequence, length testing, and determine any open, short circuit, jumper or cross-talk interference. It is said to be a ideal tool to prevent and solve cable installation problem.
Product features
1. One person enough to locate the wire or connection error
2. Checks wiring error in 5E, 6E, coaxial and telephone line, (open circuit, short circuit, jumper wire, reverse connection or cross-talk interference)
3. Make cable length measurement and determine the range of open circuit and short circuit
4. User can calibrate cable length dynamically and the accuracy can up to 95%.
5. Locates cable and there are 8 far-end passive test jacks (ID no.: ID1 - ID 8)
6. Easy operation, and clear test result on screen.
7. Portable unit with long battery life (wait-case 50 hours)
8. Automatically time-delay shut off
9. Self-checking function and automatically compensates any change in battery capacity or ambient temperature
Technical parameters
OverallDimension | 180×80×40mm |
Power Supply | 4×1.5V Size AAbatteries with power consumption 16mA |
Display | Special 4×16character big screen LCD lattice (valid visual field 61.6×25.5 mm) |
Cable type | STP/UTP twintwisted cable, coaxial cable, telephone line |
WorkingAmbient Temperature | -10~+60 |
Tester Port | Tester RJ45master port(M),tester LOOPBACK RJ45port(L), far-end Recognizer RJ45port(R).The extra BNC and RJ11converters are used to Measure andcheck the continuity of coaxial cable and telephone line. |
LengthMeasurement of Twin Twisted Cable | Scope: 350M(3~200ft) Calibration accuracy:3%(±0.5M or±.5ft)(calibrating cable≥5M) Shipment accuracy :5%(±0.5M or±1.5ft).(AMP,AT& T Class 5 cable) |
LengthCalibration | User can set theexact length by himself based on a given length cable. And the length ofcable should be more than 5M |
Wire Sequenceand Locating Cable Error | Check errorssuch as open, short circuit, reverse connection, crossover or cross-talkinterference. |
Locating Cable | 8far-end passive test jacks (ID 1-ID 8) |
AutomaticTime-delay Shut Off Time | The tester willbe on standby for 30 minutes. |
