Central Monitoring System

The Central Monitoring system is a host computer, which can be connected to several patient monitors. And it can display waveforms of ECG, respiration, SpO2 and other physical parameters in color.


Features of Central Monitoring System
> Friendly interface and easy operation for User.
> Large-sized CRT displays waveforms of ECG, respiration, SpO2 and other data in color.
> Graphic trends for heart rate, dual-temperature, SpO2, respiration rate, NIBP, IBP and EtCO2.
> Rich alarm limits settings.
> Maximum 240 hours data storage of the NIBP, Heart Rate, Pulse Rate, dual-Temperature, SpO2 and Respiration Rate.
> Waveform freezing and analysis.
> S-T segment automatic detection and display (need support from specific bedside monitors).


Network Connecting
> Serial connector and networking link selectable.
> Bidirectional signal transmissions between central unit and bedside monitors
> 2, 4 or 8 beds can be selected according to the actual monitoring status.
> Communication speed: Each channel 9600bit/s;
> Communication distance: ≥50m


Power Supply
> Power consumption: ≤150VA；
> Main unit power: Single phase AC 220V/50Hz；
> Continuous working time: 240 hours.



Composition
> Main unit: 1 Set, see the following Reference
> Central System Software: Windows XP + SP1 patch operating system
> Jet or laser printer (optional) for output of trace and text.



Hardware Configuration Reference
Computer Configuration
> Motherboard: With PCI slot, AGP bus & INTEL chipset
> CPU: P4 1.7G or higher
> RAM: 256M DDR or larger
> Hard Disk: 40G or larger
> Display: 17” CRT Color Display
> Display Card: AGP Bus / 32M Display Card
> Power Supply: Input 220V～50Hz,3.0A Output 220V～50Hz,2.5A
> Cabinet: Vertical or Horizontal
> Sound Card: Yes (Any model, better independent type)
> Floppy Drive: 1.44M　3.5’’
> CD-ROM: Yes (Any model will do)