The EC Motor is running on a DC voltage, but with 115V or 230Volts AC supply. The effect is minimum power consumption, infinite control possibilities (through 0-10V signal or PWM), but with a standard 230V 50/60Hz supply. Unlike the DC Motor which requires a separate motor driver. The electronically commutated motor can be offered with a number of options, such as hall effect or alarm output. The EC programming is also suitable for constant speed or constant pressure control, etc.
Higher efficiency
The major advantage of EC motors over their AC counterparts is far higher efficiency, Programming is also suitable for constant speed or constant pressure control. Speed control is simple, and results in impressive energy saving performance.
By using the temperature controller on an air conditioning systemto reduce the speed of the EC motor during periods of reduced cooling demand, you can cut energy wastage dramatically. For example, an annual fan energy consumption of 620 kWh can be reduced to 140 kWh using speed control.
Specifications:
Specifications:
| |||||
PowerSupply Voltage | 230V+/-20% | ||||
PowerSupply Frequency | 50Hz+/- 5% | ||||
Typeof Application | Fan | ||||
Nominal Output Power @ 1500rpm | 3/4Hp | 1/2HP | 1/3Hp | 1/4Hp | |
Speed Variation | Variable300~3000 rpm | ||||
Min Starting Torque (N.m) | 4 | 3 | 2.5 | 2 | |
MinIP (Ingress Protection) | IP55 | ||||
Environmental Condition | Humidity90% and 45°C | ||||
Min Power Factor (Cos FI) | 0.95 | ||||
Min efficiency @ 1500rpm with drive | 87 | 85 | 83 | 81 | |
Min efficiency @ Minimum Speed with drive | 65 | 64 | 63 | 61 | |
Max noise level | 50 | 49 | 48 | 47 | |
Shaft Output Diameter | 12.7mm | ||||
Motor Insulation Class | B orHigher | ||||
Max Temp rise | <=60 | ||||
IM : Mounting Type | ResilientBase for Horizontal Belt Drive | ||||
Motor Duty | S1 -Continuous | ||||
THDMax permissible THD | 5% @High speed | ||||
Min Expected Life Time | 20000hours | ||||
ApplicableStandards | IEC60034 | ||||
Rotation | Clockwise | ||||
Standard | IEC60034 | ||||
stator Insulation Material | BMC | ||||
Switching frequency | 20KHz | ||||
Max Coggingtorque/torque ripple/Speed ripple | 1% | ||||
Common mode voltage | MAX 10% | ||||
Framesize | max frame size 56mm | ||||
MotorDrive and Controller | PowerFactor Correction min 0.95 | ||||
Harmonicscontent less than 5% THD | |||||
Adjustablespeed 300~3000rpm ± 20 rpm | |||||
SoftStarting | |||||
Lockedrotor detection | |||||
Onand off Timer | |||||
Distanceof controller to drive is 50m | |||||
RequiredProtection for Motor And Drive | Thermal Protection | ||||
Short Circuit Protection | |||||
dv/dt | |||||
di/dt | |||||
over load | |||||
Controller minimum required options | Ambienttemperature Control | ||||
AutomaticOn/Off | |||||
TimerOn/Off | |||||
MotorOn/Off | |||||
/ | Adjustablethree Speeds control /Selection | ||||
WaterPump On/Off |
Wiring of Evaporative Cooler for air conditioning with EC BLDC Motor and Driver
For more information on the range or to read the new detailed product literature visit our Products section.