SJ-65 PE Lined Galvanized Steel Pipe extruder
1. high quality single screw extruder
2, steel pipe removal machine
3, inflated pipe machine
Extruding pe pipe (wall thickness 1.2—1.5mm), at the same on the pe pipe to glue the heat melting glue ,then cooling , to heat the steel pipe with induction heating apparatus electricity about 100Kw, then insert into the pe pipe by manual , to put into the electrothermal furnace to heat for 50 minutes, to fill into the gas inside the pe pipe with air compressor to make the pe pipe soft and inflated and be bonded with galvanized pipe together .
1. high quality single screw extruder
2, steel pipe removal machine
3, inflated pipe machine
Extruding pe pipe (wall thickness 1.2—1.5mm), at the same on the pe pipe to glue the heat melting glue ,then cooling , to heat the steel pipe with induction heating apparatus electricity about 100Kw, then insert into the pe pipe by manual , to put into the electrothermal furnace to heat for 50 minutes, to fill into the gas inside the pe pipe with air compressor to make the pe pipe soft and inflated and be bonded with galvanized pipe together .
No | Name | Type | Qua | Remark |
1 | single-screw Extruder | SJ-65X30 | 1 Set | With hopper drying machine and the forcing feeder |
2 | Single-screw Extruder | SJ45X25 | 1 Set | |
3 | Extruding Dies & moulds | 16-63mm | 1 Set | 32mm |
4 | Vacuum Calibration Tank | ZDLX-63x6000 | 1 Set | |
5 | Spray Cooling Tank | PLX-63x6000 | 1 Set | |
6 | Two claws Haul-off Unit | SLQ-63 | 1 Set | |
7 | Saw cutting Unit | QG-63 | 1 Set | |
8 | Unloading Stacker | FZ-63x6000 | 1 Set | |
9 | Electrical control Panel | 1 Set |