vertical clamping with vertical injection,small occupation,suitable for insert molding. computerized LCD monitor NC control system,easy to maintain and operate the machine. applied for general plastic/engineering plastic. applicable for injection of power cord plugs,electric plugs,electronic parts,auto parts,computer parts,plastic fork/knife,plastic dishware,screwdriver,hardware,sunglasses frame,ball-point pen etc.
| machine type | unit | HF-30/200 |
| screw diameter | mm | 20 |
| injetion pressure | kg/m2 | 1700 |
| thecretical volume | cm3 | 38 |
| Max.shot weight(ps) | g | 30 |
| injection rate | cm3/sec | 20 |
| screw stroke | mm | 20 |
| screw speed Max. | rpm | 0-200 |
| nozzie contact force | tons | 1.5 |
| nozzie retraction stroke | mm | 85 |
| number of trmperature control | - | 2 |
| meterial hopper capacity | L | 20 |
| clamping force | tons | 20 |
| opening force | tons | 7 |
| platen size | mm | 430*320 |
| distance between tie bare | mm | 250*250 |
| Min.mold height | mm | 40 |
| opening stroke | mm | 160 |
| Max.open daylight | mm | 260 |
| ejector force | tons | 1.2 |
| ejector stroke | mm | 50 |
| slide stroke | mm | - |
| Max.mold weight | kg | 70 |
| station clearance | mm | - |
| Max.hydraulic pressure | kg/cm2 | 148 |
| pump output | liters/min | 19 |
| oil reservoir capacity | liters | 80 |
| cooling water consumption | liters/hr | 400-600 |
| pump motor power | kw | 2.2 |
| barrel heating power | kw | 250*250 |
| total wattage | kw | 4.2 |
| machine weight | tons | 0.71 |
.jpg)
.jpg)
