usb rfid reader

  CR508A is 13.56 MHz TypeA USB emulation keyboard reader , it supports Mifare and ISO 14443 A Cards type like Mi

 
 CR501F is a Desk top contactless smart card reader/writer it supports Mifare and ISO 14443 A/B IS

 
 CR5011A is ISO14443 TYPE A  card reader/writer, it supports Mifare Ultralight and  Ca

Support ISO14443A, ISO14443B,ISO7816. the module built in antenna. Excellent quality and use widely in desktop and handheld reader. Competitive price.

RFID & Fingerprint Access Control Reader

JMY608, based on NXP SL RC400, is the reader module.

The antenna and module are the split design. And the MCU of JMY611 is MCS51.

The Pocket Reader is the smaller RFID reader known today. In spite of its very small size the reading range is equal or even greater than other bigger

USB Desktop EPC UHF Long Range RFID Reader Writer / Encoder / Enroller with ABS Plastic
 
Specifica

Rfid card reader,Color TFT screen with GUI Interface,Built-in USB port allows for manual data transfer,SDK available for OEM customers and software.

This 4 antenna port UHF RFID module is equipped with Impinj R2000 Chip, It could work in long range reading UHF RFID reader.

Integrated reader is a industry grade products for open air which adopts engineering plastic case.

rfid smart card reader, rfid/nfc mifare reader/writer, HF 13.56Mhz rfid/mifare reader/writer, iso 14443A standard, USB interface

RFID HANDHELD READER, Protocol: ISO18000-6B and ISO18000-6C/EPC Gen2, Standard: supports UHF read, WIFI, bluetooth, 1D barcode, Options:GPRS, etc.

1.125KHz (or 13.56MHz)
2.USB Interface
3.Plug and play
4. Support EM4100,Mifare One S50/S70

handheld rfid reader For Warehouse Management
1:Low cost, more economical than handheld reader integrating with PDA;

PCD: NXP RC531,RC632,RC500,RC400
Working frequency:13.56 MHz
RF standard: ISO14443A, ISO14443B, ISO15693
SAM card slot: 2
Interface: USB or RS232

1. RR7036SR support Multiple Protocols
2. Built-in TX/RX antenna with effective distance up to 15cm

Access Control No Keypad Wiegand RFID Card Reader
Nice light
Stable Reading distance
Popular Model + Waterproof

Windows Mobile 6.1 / Chipset: XScale PXA300/310 624MHz/3.5''QVGA/GPS SiRFIII GPRS/CDMA/EDGE/EVDO/HSDPA/IP64/Frequency: 13.56MHz

 
123*94*29mm UHF Desktop, Small Close-Distance Passive RFID UHF Reader and Writer, 860-

3 to 15 meters reading distance;hand-free in/out of parking lot and all-in-one card function in access control system

This series of reader with high sensitivity receiver,small operation current,single DC power supply,low price,and high reliability.

 
 
Keypad Waterproof RFID Card Reader with Wiegand Output
 

HYM750 UHF RFID reader uses R2000 chip, which complies with EPC C1G2
protocol, its working frequency is 840~960MHz,with LBT function.

PR9200 Chip
The reading distance is 0.8 meters connected to 2dBi antenna.Suitable for portable RFID reader, USB RFID reader

●Support both ISO-18000-6B and ISO 18000-6C(EPC C1G2)..
●Two outer antennas can be connected.
● Customized working frequency

AK-HR003 is a handheld ( mobile) reader, it's designed for relatively long distance data collection, the max reading distance up to 8 meters.

Fixed Reader can connect 1-4 different gain antenna by cable to control reading effective range. It can applies for multi point reading environment

JMY602 series are RFID reader/writer module with IIC or UART or USB ports.