thermocouple

Moddel WP fast thermocouple is a sensor for temperature measurement. It can be connected to a fast potentiometer .

Features:
1) Supplied with stainless steel ignition proof terminal box
2) Large varieties: Erosion resistant, leakageproof weary thermocoup

1. thermocouple
2.K type
3.0-1000C
4.SS304
5.L=550

Produce according to your requirements and drawings,

used to Water heater,Gas stove,Gas application with magnet valve.
650°C voltage:≥20mV
According to customer's design

· Mineral Insulated thermocouple cables are the industry standard, proven choice for high temperature probe fabrication.
· Bulk MI cable is rugge

ANSSEN expendable Thermocouple, your first choice! Disposal thermocouple K type (also called expandable thermocouple or K type thermocouple)

MI thermocouple cable is metal sheathed inert magnesium-oxide insulated thermocouple cable. It is used to fabricate thermocouple probes and high tempe

Applications: used in all kinds of gas appliances, such as gas ovens, BBQ, gas oven,gas cooker,water heaters and boilers etc.

1. K type thermocouple connector
2.Round pin
3.yellow connector
4.ABS material
5.Male and Femal

The thermocouple wire:
The thermocouple alloy wire with different variesties and specifications of Qunli can be applied in all kinds of thermocouples

Thermocouple assemble and RTD assembly (resistance temperature detector) are common used instrument as well as temperature sensor.

Used for measuring the temperature of molten steel and high-temperature molten metal, disposable thermocouple is disposable. Based on the thermoelectr

1. thermocouple with thermowell
2.thread connection
3.L=500mm
4.SS321
5.Class A/B

Excellent thermoelectricity, excellent linear relationship between thermoelectrically potential and the temperature.

1.Diameter :.010 upto .375
2.Calibration :K,N, E , T , J.
3.Type:Simplex,Duplex
4.Material:SS310,INCONEL600,321,316L
5.Limit error: I

Thermocouple
Brief introduction:
The PT100 RTD,thermocouples are used in industry for measuring the temperature of gases,liquids or solid .Its

1. sheathed thermocouple with compensating
2.K Type
3.0-1000C
4.SS braid Cable
5.diameter:5mm

high performance, digital operation instruments.
it is suitable for calibrating thermocouple ,resistance ,
temperature second instrument in lab an

Thermocouple
Internal Resistance:(15-70)±4mΩ(20℃);
600℃ Idling Electric Potential≥18mv;
pin type, single wires thermocouple

be used to connect thermocouples to the sensing or control instrumentation.

Applications: used in all kinds of gas appliances, such as gas ovens, BBQ, gas oven,gas cooker,water heaters and boilers etc.

A thermocouple is a temperature measuring device consisting of two conductors of dissimilar metals or alloys that are connected only at the ends.

1. high purity MGO tubes
2. Thermocouple bushing
4. Resist high temperature, thermal conductivity , insulate
5. Protect thermocouple

Used for measuring the temperature of molten steel and high-temperature molten metal, disposable thermocouple is disposable. Based on the thermoelectr

connection between thermocouple and the instrument, which displays the measured temperature.

K type thermocouple with exposed tip junction for fast response time.
K type thermocouple,temperature sensor

RTM1003 is a hand-held of 3-channel thermocouple thermometer, which uses thermocouples as sensors to measure temperature signals.

1.Thermocouple
2.K type
3.temperature:0-1000C
4.SS304 sheath
5.thermocouple Length:300mm

Silicon nitride thermocouple protection tube is for continuous temperature measurement and protect thermocouple without erosion.