spring mechanical seals

Applications:Strong corrosive fluids
Secondary Seal:Pure PTFE
Operations Conditions: Temperature:-40℃ to +250℃

Replace to:
Burgmann seal
Aesseal seal
John crane Crane seal
Flowserve seal...

For many water-based applications, such as wastewater treatment, potable water, HVAC, Pool & Spa, and other general applications.

Suit Hilge series pumps ,include Hygiana, Euro Hygia,Maxana,Dura,Sipla,Contra,and Durietta. CONICAL SPRING SEAL TYPES

Applications: Petroleum, chemical solvents, weak and medium corrosion, etc.

Single Spring rubber diaphragm seal with rubber boot mounted seat to DIN-EN 12756 seat housings
, replace the mechanical seal of AES P03 TYPE.

CR68B wave spring Mechanical Seal
equal:AES type W03
temperature:-40℃ to +200℃
Pressure:<<0.8 Mpa
Speed:<<18m/s

In pumps and units, sealed with petroleum products, liquefied hydrocarbon gases, fluids containing harmful chemical substances.

applied for water pumps and household pumps.

Mechanical Seals type AZ9T replace to:
John Crane 9-T seal
Aesseal M05 seal
Sterling 294 seal

It to suit I.M.O pump . pump mechanical seal parts for triple rotors screw pump
fuel oil supply system for ship in marine. Boat mechanical seals.

Mostly Use: High corrosion mediums of different concentrations,
such as sulfuric acid, hydrochloric acid,

High qulity AES CDSA Double Cartridge Seals.The standard seal unit is 316 Stainless Steel with Carbon and Silicon Carbide faces and Viton O' rings.

Stationary Ring:Ceramic(Alumina),Silicon Carbide Reaction Bonded,Silicon Carbide Sintered Pressureless,Ni-binder Tungsten Carbide

1.used in industrial pumps
2.good price and high quality
3.prompt delivery

Temperature:-20℃ to +180℃
Pressure: ≤1.0MPa
Speed: ≤15m/s

CR68C wave spring Mechanical Seal
equal :AES-W02
temperature:-40℃ to +200℃
Pressure:<<0.8 Mpa
Speed:<<18m/s

We are professional various kinds of mechanical seals. such as Pump seal, Industrial pump seals, Auto Cooling pump seals, ect

Replacejohn crane 59B SEALS.
Single seal face
Balanced(59B),unbalanced(59U)
PTFE seal ring
Independent of direction or rotation

Non-clogging single coil spring self aligning feature compesates for excessive shaft .Suitable for many specifications and designs

Upper and lower 25 mm shaft size seals for use together, but available separately, to suit various A.B.S.® submersible pumps

Multi-Spring type WB2
teflon material for the rotary ring and secondary seal
temperature:-20℃ to +120℃
Pressure:<<0.5mpa
Speed:<<10m/s

Temperature:-20℃ to +180℃
Pressure: ≤1.0MPa
Speed: ≤15m/s

Stationary Ring(Ceramic/SiC/TC)
Rotary Ring(Plastic Carbon/Carbon/SiC/TC)
Secondary Ring(NBR/EPDM/VITON)
Spring and Retainer(S

1. high quality
2. excellent price
3. kinds of sizes
4. delivery quickly

stationary seals to suit fristam pump applications. Replacement seals for food, Beverage and Dairy industries.
size: 22mm,30mm, 35mm
material: s

Mechanical seals for Donjoy Lobe Pump . and Centrifugal Pumps , S-KS/KS/BS/etx
and Self-priming Pump , CIP ,CIP+, and Blener/Mix pumps

1.unbalanced
2.single seal
3.dependent on direction of rotation.
4.promote deliverly

Multi-Spring mechanical seal burgmann type 105
temprature:-20-220℃
pressure:0-1Mpa
viscosity:<300CP
shafe size:14-200mm

Cartridge Mechanical Seals:
Temperature: -40℃~220℃
Pressure: 2.5Mpa
Speed: 20m/s