elastomer bellow mechanical seals

GW301 replace brugmann BT-AR SEAL.
small seal for large pump series", a mechanical seal for mass produced water pumps.

FBD series pump seal. Single seal .Ualanced .

elastomer bellow mechnical seals. Equivalent to John crane type1A. used in Clean water, sewage water, oil and other moderately corrosive fluids.

equivolent AES BP02, burgmann MG1S20, VULCAN TYPE1520 type seal. wide variety of stock Boot Mounted Seats.

Replace John Crane type 502 mechanical seal. With BO seat.
Single seal
Unbalanced
Independent of direction of rotation
Elastomer bellows

Equivalent to John crane type 21,Rubber bellow seal.AES P04 SEALS. Our general-purpose seal has become the industry standard for OEM designers

single seals, Unbalanced,
This mechanical seal is one of the most commonly used for corrosion resistant pumps. Equivalent to Jhon crane type10T

Mediums:Oil,light hydrocarbon,aromatic hydrocarbon, organic solvents,weak acids, alkali,Ammonia,etc.
No leakage mechanical seals

Elastomer rubber bellows/ Equivalent to Burgmann MG1/MG12/MG13/MG1S20,TS MG1 MECHANICAL SEAL. Water pump seal.

equivolent to vulcan type14,142 ,143 seal. rubber bellow seal.

Stationary Ring:Ceramic(Alumina),Silicon Carbide Reaction Bonded,Silicon Carbide Sintered Pressureless,Ni-binder Tungsten Carbide

Seal face: Carbon graphite antimony impregnated (A), Carbon graphite resin impregnated (B), Silicon carbide (Q1)
Seat: Silicon carbide (Q1, Q2),

WB2 Elastomer Bellow mechanical seal
most common and low priced used for simple and non-critical applications
having single spring

If you are used to use the die casting and mechanical seal, then our goods must be meet your requirements.
Stationary Ring:Ceramic(Alumina),Silicon

single seals, Unbalanced,
This mechanical seal is one of the most commonly used for corrosion resistant pumps. Equivalent to JC10T

Stationary Ring:Silicon Carbide Sintered Pressureless,Ceramic(Alumina)

Design features:Elastomeric bellows seal design including kinds of statconary ring , complying with DIN24960 and ISO3069 , combined with P60 , P50 ,t6

STATIONARY RING: CERAMIC/SIC/TC
ROTARY RING: CARBON/SIC/TC
SECONDARY SEAL: NBR/EPDM/VITON
SPRING&METAL PARTS: STEEL

elastomer bellow mechnical seals. Equivalent to John crane type1A. used in Clean water, sewage water, oil and other moderately corrosive fluids.

Stationary Ring:Ceramic(Alumina),Silicon Carbide Reaction Bonded,Silicon Carbide Sintered Pressureless,Ni-binder Tungsten Carbide

Secondary Seal:Fluorocarbon Rubber(Viton),Ethylene Propylene(EPDM),Nitrile(NBR)
We can supply kinds of casting parts,mechanical seals

Design features:Elastomeric bellows seal design including kinds of statconary ring , complying with DIN24960 and ISO3069 , combined with P60 , P50 ,t6

Used in water pumps, submersible pumps and sewage pumps, etc.
Pressure: within 1Mpa
Speed: within 10m/s
Temperature: -30℃~200℃

Because of more than twenty years experiences , we become one of the leading manufacturers of die casting and mechanical seals in China

Speed:≤15m/s Because of more than twenty years experiences, we become one of the leading manufacturers of die casting and mechanical seals in china

Stationary Ring:Ceramic(Alumina),Silicon Carbide Reaction Bonded,Silicon Carbide Sintered Pressureless,Ni-binder Tungsten Carbide

We will supply with our best professional service to customers.
If you have any interest in our products, please do not hesitate to contact us

Applied for submersible pumps and sewage pumps, etc.
Pressure: within 0.35Mpa
Speed: within 6m/s
Temperature: -20 to 100 degree celsius

Medium: Oil, Water, Chemical solvents, Acid, Alkali and other liquid.
Size:20mm~120mm
Pressure: ≤3.0Mpa
Temperature: -75°C~200°C
Speed: ≤30m/s

If you have any interest in our products, please do not hesitate to contact us,We will supply with our best professional service to customers.