acrylic fiber braided packing

1.Max. working temperature:-100 ~ +120 oC
2. Cross Section: 1/8" ~ 2"
3. Density: 1.10 ~ 1.20g/cc
Density: 1.25 ~ 1.35g/cc(WITH LUBRICANT)

Packing made of special acrylic yarns. Each single yarn is impregnated with PTFE.

The packing is manufactured in the following procedures: polyacrylonitrile fibre is heated into carbonized fibre, which is woven into packing after im

Carbonized Fiber AIFLON 2100 Carbonized Fiber Packing Braided from shrink-proof oxdized polyacrylonitrile fiber impregnated with PTFE dispersion conta

1.Max. working pressure:10Mpa(valve)
2.PH value: 2-12
3.Linear speed: 10M/S(rotary pump)
Linear speed: 1.5M/S(reciprocating pump)

PTFE graphite fiber braided packing (Balck PTFE packing )consists of PTFE yarn containing graphite panicles.

Expanded Graphite Fiber Braided Packing

Aramid fiber packing is square braided from Du Pont's kevlar yarn impregnated with PTFE dispersion and processed with lubricant.

We are a professional manufacturer and exporter specializing in seal products,e.g. gakt,packing,sheet,seal material etc.

Carbonized Fiber Packing is applicable to corrosive liquid such as acid and alkali, organic solvent, etc. It is used in the sealing of flange, valve

Uriversal packing which can be used for pumps in all types of industry such us chemicals, petrochemicals, sewage treatment, paper etc. For hot water a

1.Max. working temperature: -75 ~ 260oC
2.Max. working pressure:1.5 Mpa(rotary pump)
3.Cross Section: 1/8" ~ 2"
4.Density: 1.45 ~ 1.55g/cc

Kevlar fiber braided packing is made of DuPont's Kevlar yarn impregnated with PTFE dispersion and processed with lubricant, braided into square cross

1) pH value: 0 - 14
2) Linear speed: 0 -2m/s
3) Cross Section: 1/8" ~ 2"
4) Density: 1.10 ~ 1.30g/cc
5)Density :1.50 ~ 1.60g/cc(with inconel

PTFE FIber Braided Packing is often used in check and needle valve stems, reciprocating rods, rams, and plungers, and safety injection system valves.

Acrylic fibre braided packing is made from acrylic fiber.

Kevlar fiber packing is made of Du Pont's Kevlar yarn impregnated with PTFE dispersion and processed with lubricant.braided into square cross section

1. Packing made of synthetic fiber yarns
2. Packing needs impregnating with block agents, lubricants
3. Economic seal packing choice

Temperature -100-+280
Pressure 35 MPa
linear velocity 12m/s
Chemical Resistance PH value 2-12

WEALSON is manufacturer and exporter of gasket materials,gaskets and gland packing,we can offer products with good quality and low price.

Made of polyacrylonitrile fibre through reinforcing braiding and impregnated with PTFE, having highstrength, wear-and impact-resistance, and ideal sub

WEALSON Pure Ptfe Fiber Packing is made of pure PTFE yarn, there are no PTFE latex and lubricant.

Plaited packing made of cotton yarns, impregnated with a mix of lubricants
Reciprocating and rotary applications

Aramid Carbonized Fiber Braided Packing is applicable to grinding media such as water, seawater, various oils, solvents, weak acid, ethanol, used in t

Braided from high quality Dupont Aramid/Kevlar fiber with PTFE Impregnation and lubricant additive. Extremely hard wearing.

WEALSON Pure Ptfe Fiber Packing is made of pure PTFE yarn, there are no PTFE latex and lubricant.

made from expanded pure graphite yarn,braided into packing through all kinds of technology of braiding.

KEVLAR FIBER BRAIDED PACKING

AT517 Braided from polyacrylonitrile fibers which are impregnated with PTFE. It has properties of high strength, wear and impact resistance.

Graphite PTFE and Aramid Fiber in Zebra Braided Packing
1. Superior performance
2. Lower frictional factor